|
|
Widely used launching crane from China factory is bridge crane that places precast concrete beam into precast pier. And it consist of main girder,front leg, middle leg, rear leg, rear auxiliary leg, lifting trolley, hydraulic system and electrical device.
Bridge launcher girder crane is suitable for highway and railway bridge, such as straight bridge, skew bridge, curved bridge and so on.
|
|
|
The launcher gantry crane is a gantry crane specially designed for bridge construction. The beam crane is mainly composed of the assembled main beam, outriggers, cranes, etc. All parts are connected by pins and high-strength bolts, which are easy to disassemble and transport. Compared with ordinary gantry cranes, the installation is convenient, economical and practical. It is suitable for the construction of continuously flowing highway bridges. |
|
|
Driver Rubber Tyred Gantry Crane with diesel engine AC generator power supply, within the site without laying rails for moving in two directions. Bearing in large tubeless tires. Wheel number is designed according to the requirements of the ground wheel pressure. Operate the whole crane in the cab. |
|
|
Concrete Beam Transport Vehicle is a kind of trailer set to transport long cargoes by loading two ends of them, which is the most effective and economical way to transport long cargo like steel structure, long steel pipe, precast concrete beam and long bridge section. |
|
|
KPX Series transfer trolley are battery powered. The batteries are installed in the carts. The batteries supply electricity to the DC motor through the electrical control system. We use this principle to operate the carts, for example, start, stop, go forward and backward, adjust the speed and so on. KPX transfer trolley can be used both on the 'S' and arc-shaped railways.
They also can be used in the ferry condition and flammable, explosive environment. The hydraulic lifting device can be installed on the transfer trolley. |
|
|
KPJ Series railway transfer trolley are powered by the cable reels. The transfer trolley get power AC 380V through the device of cable reel which is installed at the bottom of the cart. The motor is controlled by the power through the AC control system. We use this principle to operate the carts, for example, start, stop, go forward and backward and so on. The operation system is low voltage 36V. The hydraulic lifting device can be installed |